This is an old revision of the document!
Table of Contents
Datasheet
Telemetry radio module S1AX / SENTRY
S1AX is a telemetry module, which is a part of the SENTRY product portfolio.
Datasheet for S1AX
| Example of available measurement modules | pressure transducer S1AP, temperature transducer S1AT, pulse / binary module S1AY, NAMUR S1AN, RS485 S1AS |
| Version | normal or Ex (for potentially explosive atmospheres) |
| Environmental working characteristics | -20°C to + 60°C; max. 95% relative humidity |
| Power supply | internal non-rechargeable Li-SOCl2 module, user replaceable |
| Wireless communication options | Bluetooth, LoRaWAN, NB-IoT, Sigfox, XBee / ZigBee / 802.15.4 |
| Mounting connector | connector SENTRY version 1, keying type “A” |
| Materials | ASA plastics |
| IP rating according to EN 60 529 | IP 65 |
Dimensions
All dimensions in [mm] or [g]
Order codes for S1AX telemetry module
Uplink radio type (R)
| R0 | NB-IoT - band 20 |
| R1 | LoRaWAN - EU 868MHz |
| R2 | Bluetooth - 2.4GHz |
| R3 | XBee - 2.4GHz |
| R4 | Sigfox |
| RX | special - on request |
Version (V)
| V0 | ATEX Zone 2 |
| V1 | Non-ATEX |
| VX | special - on request |
Power supply (P)
| P0 | Battery module S1AB-B0 or S1AB-B1 |
| P1 | Battery module S1AB-B0 only (for Ex environments) |
| PX | special - on request |
Working temperature (W)
| W0 | -20 az +60C 95%RH |
| WX | special - on request |
Antenna type (A)
| A0 | internal |
| A1 | external N connector |
| A2 | external SMA connector |
| AX | special - on request |
Offline datalogger memory size (D)
| D0 | without offline logging |
| D1 | 32Mbit memory |
| DX | special - on request |
Markings and labeling
Information on label:
- Manufacturer and country of manufacture
- Device type
- Order number
- IP rating
For version intended for use in potentially explosive environments:
- Safety type
- Additional information on how to handle device in Ex environments
Ordering
The pruchase order shall contain the following information:
- Order reference number and date
- Invoicing and delivery address (including VAT number)
- Parts order numbers from ordering table, number of units requested, requested expedition date
- Type of expedition (for example ex-works, delivery)
- List of additional options
Packaging and delivery
S1AX modules are packed individually into adequate carton boxes (for example. type MODEL / 13105 / 200 x 150 x 150 mm)
Every box contains printed information with technical specification and general business processes information. such as waranty information
Models intended for use in potentially explosives atmospheres (Ex) additionally contain documents required for such device - for example certificate of conformity and other.
Installation
Telemetry module S1AX is directly mounted and screwed on top of the measurement modules.
Additional options
- Battery module (2x Li-SOCl2) S1AB-B0